CELL-LINK

UNIVERSAL CELLULAR ADAPTER

General

  • Activate the CELL-LINK.
  • First, turn on the CELL-LINK and wait for it to fully set up.
  • When there is no more light flashing or visible, please set up your camera.
  • Now connect the CELL-LINK to your camera.
  • When attaching, make sure the CELL-LINK and camera are as close to each other as possible.
  • Now get your camera ready for detection.

  • The CELL-LINK only works with micro SD cards.
  • Please use a micro SD card between 2 to 32GB capacity.
  • Make sure that you only use Class 4 or Class 10 memory cards.
  • Please format the memory cards before the first use.

  • The CELL-LINK works with 8x R6(AA) batteries, the LIT-10 battery pack or with a 12V battery.
  • Make sure that the batteries are inserted correctly into the battery compartment, otherwise the CELL-LINK may be damaged.

  • During the signal search, the status LED lights up permanently green, while the signal LEDs flash.
  • When the CELL-LINK has found a signal, it indicates this by means of the LEDs.
  • The status LED now flashes for 30 seconds.
  • If the connected camera has taken a picture, the status LED lights up permanently green during transmission.

Instruction manual

Troubleshooting Wizard

SOFTWARE

Please note:
Sometimes the versions you can find here may differ from the versions on spypoint.com. The versions listed here have been extensively tested in Europe and run stably. We do not take any responsibility for software versions from other sources!

Version:
V1.05.02-5

Improvements:

  • Improved compatibility with additional camera models
  • Improved connection stability in mobile network
  • Small bugs fixed

  1. Make sure you use a Class 4, Class 10, or Class 10/U1 micro SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the 2 files from the .zip file to the micro SD card. (Only the individual files, no folders).
  6. Make sure that the CELL-LINK is turned off.
  7. Insert the micro SD card into the CELL-LINK.
  8. Switch on the CELL-LINK.
  9. The CELL-LINK will automatically install the update.
  10. Once the CELL-LINK has been updated, it will re-set up.

  1. Make sure you use a Class 4, Class 10, or Class 10/U1 micro SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the 2 files from the .zip file to the micro SD card. (Only the individual files, no folders).
  6. On the Micro SD card, right-click MacOS_PrepareSDCard.command and select Open with Terminal to run the file.
  7. Make sure that the CELL-LINK is turned off.
  8. Insert the micro SD card into the CELL-LINK.
  9. Switch on the CELL-LINK.
  10. The CELL-LINK will automatically install the update.
  11. Once the CELL-LINK has been updated, it will re-set up.

Subscribe to the newsletter here!

Be the first to know about new products, software updates or promotions at spypoint.store!