SOLAR-DARK

SOLAR TRAIL CAMERA

General

  • The SOLAR-DARK only works with standard SD cards.
  • Please use a standard SD card between 2 to 32GB capacity.
  • Make sure that you only use Class 4 or Class 10 memory cards.
  • Please format the memory cards before the first use.

  • The SOLAR-DARK works with 8x R6(AA) batteries, the LIT-09 rechargeable battery or with a 12V battery.
  • Make sure that the batteries are inserted correctly into the battery compartment, otherwise the SOLAR-DARK may be damaged.
  • The SOLAR-DARK can also be operated completely without external power supply

Manual

SOFTWARE

Please note:
Sometimes the versions you can find here may differ from the versions on spypoint.com. The versions listed here have been extensively tested in Europe and run stably. We do not take any responsibility for software versions from other sources!

Version:
V2.05.20

Improvements:

  • Sound improvement

  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, no folders).
  6. Make sure that the SOLAR-DARK is switched off.
  7. Insert the SD card into the SOLAR-DARK.
  8. Press and hold the "OK" button and turn on the camera.
  9. The camera turns on and "Executing firmware update." can be seen, you can release the button.
  10. After the update, the camera will reboot itself.

  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, not folders).
  6. Right-click MacOS_PrepareSDCard.command on the SD card and select Open with Terminal to run the file.
  7. Make sure that the SOLAR-DARK is turned off.
  8. Insert the SD card into the SOLAR-DARK.
  9. Press and hold the "OK" button and turn on the camera.
  10. The camera turns on and "Executing firmware update." can be seen, you can release the button.
  11. After the update, the camera will reboot itself.

Subscribe to the newsletter here!

Be the first to know about new products, software updates or promotions at spypoint.store!