LINK-S LTE

SOLAR CELLULAR TRAIL CAMERA

General

SD cards
  • The LINK-S only works with standard SD cards.
  • Please use a standard SD card between 2 to 32GB capacity.
  • Make sure that you only use Class 4 or Class 10 memory cards.
  • Please format the memory cards before the first use.
Power supply
  • The LINK-S works with 8x R6(AA) batteries, the LIT-09 rechargeable battery or with a 12V battery.
  • Make sure that the batteries are inserted correctly into the battery compartment, otherwise the LINK-S may be damaged.
  • The LINK-S can also be operated completely without external power supply

Manual

Quick-Start-Guide Multilingual (DE, EN, FR)

QSG-LINK-S v1.5_DE_FR_ENG

SOFTWARE

Please note:
Sometimes the versions found here may differ from the versions found on spypoint.com. The versions listed here have been extensively tested in Europe and are running stable. We do not take any responsibility for software versions from other sources!

Version:
V2.11-35-77

Improvements:

  • Small bugs fixed
DOWNLOAD
Installation instructions (PC)
  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, not folders).
  6. Make sure that the LINK-S is turned off.
  7. Insert the SD card into the LINK-S.
  8. Press and hold the “OK” button and turn on the camera.
  9. The camera will turn on and “Executing firmware update.” can be seen, you can release the button.
  10. After the update, the camera will reboot itself.
Installation instructions (MAC)
  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, not folders).
  6. Right-click MacOS_PrepareSDCard.command on the SD card and select Open with Terminal to run the file.
  7. Make sure that the LINK-S is turned off.
  8. Insert the SD card into the LINK-S.
  9. Press and hold the “OK” button and turn on the camera.
  10. The camera will turn on and “Executing firmware update.” can be seen, you can release the button.
  11. After the update, the camera will reboot itself.

Subscribe to the newsletter here!

Be the first to know about new products, software updates or promotions at spypoint.store!

To the registration