FORCE-20

Ultra Compact Trail camera

General

SD cards
  • The FORCE-20 only works with standard SD cards.
  • Please use a standard SD card between 2 to 32GB capacity.
  • Make sure to use only Class 4 or Class 10 memory cards.
  • Please format the memory cards before the first use.
Power supply
  • The FORCE-20 works with 8x R6(AA) batteries or with one 12V battery.
  • Make sure that the batteries are inserted correctly into the battery compartment, otherwise the FORCE-20 may be damaged.

Manual

SOFTWARE

Please note:
Sometimes the versions you can find here may differ from the versions on spypoint.com. The versions listed here have been extensively tested in Europe and run stably. We do not take any responsibility for software versions from other sources!

Version:
V0.3

Improvements:

  • Improvement of the “Date” setting
DOWNLOAD
Installation instructions (PC)
  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, not folders).
  6. Make sure that the FORCE-20 is turned off.
  7. Insert the SD card into the FORCE-20.
  8. Turn on the camera in the “Setup” menu.
  9. Press “OK” to enter the menu.
  10. Select the “About” option and press “OK”,
  11. Press “UP” and confirm with “OK”.
  12. Press “UP” and press “OK” to start the update.
  13. The display shows “Upgrading”.
  14. The display turns off, you can turn off the camera.
  15. The camera is upgraded.
Installation instructions (MAC)
  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, not folders).
  6. Right-click MacOS_PrepareSDCard.command on the SD card and select Open with Terminal to run the file.
  7. Make sure that the FORCE-20 is turned off.
  8. Insert the SD card into the FORCE-20.
  9. Turn on the camera in the “Setup” menu.
  10. Press “OK” to enter the menu.
  11. Select the “About” option and press “OK”,
  12. Press “UP” and confirm with “OK”.
  13. Press “UP” and press “OK” to start the update.
  14. The display shows “Upgrading”.
  15. The display turns off, you can turn off the camera.
  16. The camera is upgraded.

Subscribe to the newsletter here!

Be the first to know about new products, software updates or promotions at spypoint.store!

To the registration