LINK-EVO 4G

CELLULAR TRAIL CAMERA

General

  • The LINK-EVO only works with standard SD cards.
  • Please use a standard SD card between 2 to 32GB capacity.
  • Make sure to use only Class 4 or Class 10 memory cards.
  • Please format the memory cards before the first use.

  • The LINK-EVO 4G works with 8x R6(AA) batteries, the LIT-09 rechargeable battery or with a 12V battery.
  • Make sure that the batteries are inserted correctly into the battery compartment, otherwise the LINK-EVO may be damaged.

Manual

SOFTWARE

Please note:
Sometimes the versions you can find here may differ from the versions on spypoint.com. The versions listed here have been extensively tested in Europe and run stably. We do not take any responsibility for software versions from other sources!

Version:
V2.10.36

Improvements:

  • Small bugs fixed

  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, no folders).
  6. Make sure that the LINK-EVO is turned off.
  7. Insert the SD card into the LINK-EVO.
  8. Turn on the camera and wait 2 minutes.
  9. Turn off the camera and remove the power supply.
  10. Reinsert the power supply.
  11. Turn on the camera and the camera will connect by itself. This step may take a few minutes.

  1. Make sure you use a standard Class 4, Class 10, or Class 10/U1 SD card with up to 32 GB.
  2. Format the SD card. (Video)
  3. Download the software.
  4. Open the downloaded .zip file by double-clicking it.
  5. Copy the files from the .zip file to the SD card. (Only the individual files, not folders).
  6. Right-click MacOS_PrepareSDCard.command on the SD card and select Open with Terminal to run the file.
  7. Make sure that the LINK-EVO is turned off.
  8. Insert the SD card into the LINK-EVO.
  9. Turn on the camera and wait for 2 minutes.
  10. Turn off the camera and remove the power supply.
  11. Reinsert the power supply.
  12. Turn on the camera and the camera will connect by itself. This step may take a few minutes.

Subscribe to the newsletter here!

Be the first to know about new products, software updates or promotions at spypoint.store!